[sdiy] Need help with a SMD kit (OT?)

[Elain Klopke]

Yes, the kit says it comes with the processor flashed with the firmware
available at the time the kit was put together.

On Tue, Jul 18, 2017 at 9:16 AM, Vladimir Pantelic <vladoman at gmail.com>
wrote:

> On 18.07.2017 15:57, Elain Klopke wrote:
>
>> Well.... Nevermind....
>>
>> I found my solder wick and was terribly happy to get all the excess blobs
>> off
>> the chips. The controls and jacks went in with ease. And then I plugged
>> it in,
>> fed it power (Red stripe where it is meant to be), and nothing happened.
>> No
>> lights. No sound. Nothing. I have a feeling that I severely overheated at
>> least
>> the microcontroller if not a few other bits of it.
>>
>
> is the CPU programmed at all?
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170718/0bbd74ff/attachment.htm>