[sdiy] Crumar bit one EPROM .bin anyone

Adam Inglis 21pointy at tpg.com.au
Wed Jan 25 03:21:00 CET 2017


FWIW
my Roland MD-8 boots up in Omni mode, and yes, if you have the midi out plugged in to the midi in at the time, it changes to Poly mode

AI
> On 25 Jan 2017, at 1:06 AM, Tony K <weplar at gmail.com> wrote:
> 
> One more thing I forgot to mention concerning how the older Jupiter-6 could be changed to accept on only one channel (ch.1 or ch.2).
> 
> I can't recall if you had to press a key after connecting MIDI Out to MIDI In, to put synth in Poly Mode=On (ch.1 in Whole mode), or Mode messages transmitted on power took care of this ( All Notes Off on Lower/Upper) . Been a while, but can verify later.
> 
> Sorry if this sounds confusing, just thinking out loud here. Can't hurt to try that loopback trick and see if it turns OMNI Off/Poly (Mode 3).
> 
> Let us know.
> 
> 
>> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
> http://synth-diy.org/mailman/listinfo/synth-diy <http://synth-diy.org/mailman/listinfo/synth-diy>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170125/516c8149/attachment.htm>


More information about the Synth-diy mailing list