[sdiy] help with uQ repair

[Julian Schmidt]

It really looks like the voice expansion was removed.
I found the installation guide for the expansion:

http://4.bp.blogspot.com/_rScBRKlTdoE/TAvaGEbq1FI/AAAAAAABHp0/SqobQjhq0j4/s1600/DSC04045.JPG
http://4.bp.blogspot.com/_rScBRKlTdoE/TAvaF9-3qII/AAAAAAABHps/VfLPzu8_jnU/s1600/DSC04046.JPG

and it mentions switching the xtal for a low profile version and adding 
the 32 pin male header.
Both are installed in my unit.

I'm in contact with waldorf now, maybe they can tell me which parts to 
change back or if it is a problem.
I have to say, great customer support for such an old unit.

Julian

Am 24.02.2017 um 17:33 schrieb ASSI:
> On Friday, 24 February 2017 17:20:03 CET Julian Schmidt wrote:
>> It looks like a very early yellow unit serial 555.
> If it's really an early unit (and no, the color doesn't really give that info
> and the serial numbers on those units weren't created the way you assume them
> to)… these didn't have a voice expansion as they were not expandable at all,
> although someone may have tried it anyway.  Check the main board version, it
> should both be on the board somewhere and mentioned in the diagnostics.  If
> there's a mismatch between what the board really is and the uC thinks it
> should be, then it's unlikely that the DSP boot is going to work.
>
>
> Regards,
> Achim.