[sdiy] Where to get cable and wire by the meter?

[cheater00 cheater00]

Seems to be the right pitch. I hope to find something a bit less rainbowy
though :) great find, thanks.

On Tue, 21 Feb 2017 04:37 BrightBoy, <jdec at mindspring.com> wrote:

> Not sure what the dimensions are on the ribbon cable here:
>
> http://www.apexjr.com/wire.html
>
> Jeff
>
> -----Original Message-----
> From: cheater00 cheater00
> Sent: Feb 20, 2017 10:14 PM
> To: synth-diy mailing list
> Subject: [sdiy] Where to get cable and wire by the meter?
>
> Hi guys, is there a good source online that sells a lot of types of wire
> and cable, by the meter? I'm looking for a wide selection.
>
> In this case i am looking for an unusual flat wire: with 2.5mm pitch.
> Imagine a normal floppy disk flat cable with every other conductor removed.
> That's it - normal flat cable has 1.25mm pitch for two pins every 2.5mm and
> i need a single conductor per 2.5mm. This is for my tb-303 and i need a
> cable with 8 conductors. I don't want to use a normal IDC cable as that
> would be ugly.
>
> Mouser stocks this. 100 ft order minimum though.
>
> In general I am looking for a good source of cable with low minimal orders.
>
>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170221/74e84429/attachment.htm>