[sdiy] Where to get cable and wire by the meter?

[cheater00 cheater00]

Btw, 3M makes this cable, 8125/08, no idea where to get it in affordable
quantities though.

On Tue, 21 Feb 2017 04:14 cheater00 cheater00, <cheater00 at gmail.com> wrote:

> Hi guys, is there a good source online that sells a lot of types of wire
> and cable, by the meter? I'm looking for a wide selection.
>
> In this case i am looking for an unusual flat wire: with 2.5mm pitch.
> Imagine a normal floppy disk flat cable with every other conductor removed.
> That's it - normal flat cable has 1.25mm pitch for two pins every 2.5mm and
> i need a single conductor per 2.5mm. This is for my tb-303 and i need a
> cable with 8 conductors. I don't want to use a normal IDC cable as that
> would be ugly.
>
> Mouser stocks this. 100 ft order minimum though.
>
> In general I am looking for a good source of cable with low minimal orders.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170221/c7aeed34/attachment.htm>