[sdiy] [AH] Refurbishing of the old Roland rocker switches

[Terje Winther]

Yes, please; if anyone knows, or if you find a solution, Florian,  
please share!!

Terje


Den 5. feb.. 2017 kl. 19.43 skrev Florian Anwander:

> Hello,
>
> I am looking for someone who has experience in overhauling /  
> refurbishing the rockerswitches from old Roland string machines,  
> like the VP-330, RS-101/202/505 or RS-09.
>
> See http://www.florian-anwander.de/roland_rs505/
>
> In my RS-505 the switches tend to make shakey contact. I tried to  
> open them, but it is not possible to get to the switching contacts  
> themselves.
> I drilled small holes in the bottom plate and sprayed contact spray  
> inside (see last picture), but it did help only a little. I assume,  
> that the contact rocker inside is bent flat and the only help might  
> be rebending it again.
>
> Did anyone of you ever succeed in disassembling those switches  
> completely?
>
>
> Regards
> Florian
>
> -- 
> http://www.florian-anwander.de/
>

Terje Winther
terje.winther at wintherstormer.no
http://wintherstormer.no/





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170206/3877e1bc/attachment.htm>