[sdiy] Updated MIDI Spec for 3.3v
vladoman at gmail.com
Fri Aug 11 22:47:14 CEST 2017
On 11.08.2017 17:33, MTG wrote:
> I found out from the guy at MIDI Solutions since he's making some tweaks to his
> products. There are also a few blog entries on the MIDI.org site about a new
> standard smaller connector, and a few comments about what people "out there"
> have been doing with 3.5mm stereo jacks. Not sure that's the way they'll go but
> it would be nice if they picked a connector that's easily panel-ized,
> inexpensive, available and isn't already used for something else in our repertoire.
I needed a smaller connector *now*, so I am using the Arturia/Novation
"standard" 3,5mm solution with an isolated stereo jack (sadly it's taller than
the typical Eurorack 10mm/11mm panel to PCB height so I have to have a cutout in
the PCB at that place for now...)
More information about the Synth-diy