[sdiy] LM3046 EOL

[Barry Klein]

I don't know if you know but I worked at MM at that time and worked with Leo on finalizing the design and pcb layout. I don't know/remember who chose that part in the first place - I suspect Tom Walker. Looks like Mouser is selling the IC die. Is that for installation and epoxy coat on a board (COB) or what?


> On Aug 16, 2017, at 10:17 AM, "jarno.verhoeven at ziggo.nl" <jarno.verhoeven at ziggo.nl> wrote:
> 
> IIRC, only the pre Ernie Ball preamp uses that opamp, at least the 5 strings have a totally different preamp, but the current two band is also different from the old one.
> I made a board for the old style preamp, still need to verify it.
> Nice though, it sounds great in that preamp, and has an insanely low current draw.
> 
> 
> ------ Origineel bericht------
> Van: Barry Klein
> Datum: wo, 16 aug. 2017 19:02
> Naar: Vladimir Pantelic;
> CC: synth-diy at synth-diy.org;
> Onderwerp:Re: [sdiy] LM3046 EOL
> 
> Have they been using it all this time?> On Aug 16, 2017, at 9:17 AM, Vladimir Pantelic  wrote:> > damn, they are killin the LM4250 too, MusicMan will need to find a new opamp for Stingray bass preamps...> >> On 16.08.2017 17:38, Barry Klein wrote:>> It looks like TI put the LM3046 on EOL status.....>> >> Barry>> _______________________________________________>> Synth-diy mailing list>> Synth-diy at synth-diy.org>> http://synth-diy.org/mailman/listinfo/synth-diy>> > > _______________________________________________> Synth-diy mailing list> Synth-diy at synth-diy.org> http://synth-diy.org/mailman/listinfo/synth-diy_______________________________________________Synth-diy mailing listSynth-diy at synth-diy.orghttp://synth-diy.org/mailman/listinfo/synth-diy
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170816/bd9898e1/attachment.htm>