[sdiy] How to mount of module

[Oren Leavitt]

On 4/30/17 8:16 AM, shine32 wrote:
> Hi Lists,
>
> I am using the 904A VCF by M.C.E., and three kinds of hand made VCF.
> My own VCF is three types ,4 stage cascade using NJM 13600, state 
> variable type connected in 2 stages using SSM2164 and transistor type 
> ladder type of mini moog type.
> I made the demo.
> https://www.youtube.com/watch?v=I14fRV-Kadc
>
> Now, I have some question.
> It is a way of attaching each module to a new wooden case, either 
> directly attached or mounted on a metal bar for mounting.
> When installing directly, I have experienced the trouble that the 
> screw hole spreads out with wood screws, and it becomes ineffective.
> Is there any other good realistic way?
>
> Regards,
>                                                   Atsushi maeda.

I have one cabinet in which I mount the modules to wood. I've found that 
it helps to drill small pilot holes where you'll be putting the screws. 
This keeps the wood from spreading and splitting.

- Oren