[sdiy] How to mount of module

[Vladimir Pantelic]

if the wood is hard enough you can also drill and tap and use threaded
screws

On Apr 30, 2017 17:06, "Jarno Verhoeven" <jarno.verhoeven at ziggo.nl> wrote:

>
> Drill first, that'll prevent splitting the wood rails.
>
>
> Verzonden vanaf mijn Samsung-apparaat
>
>
> -------- Oorspronkelijk bericht --------
> Van: shine32 <shine32 at kr.tcp-ip.or.jp>
> Datum: 30-04-2017 15:16 (GMT+01:00)
> Aan: synth-diy at synth-diy.org
> Onderwerp: [sdiy] How to mount of module
>
> Hi Lists,
>
> I am using the 904A VCF by M.C.E., and three kinds of hand made VCF.
> My own VCF is three types ,4 stage cascade using NJM 13600, state
> variable type connected in 2 stages using SSM2164 and transistor type
> ladder type of mini moog type.
> I made the demo.
> https://www.youtube.com/watch?v=I14fRV-Kadc
>
> Now, I have some question.
> It is a way of attaching each module to a new wooden case, either
> directly attached or mounted on a metal bar for mounting.
> When installing directly, I have experienced the trouble that the screw
> hole spreads out with wood screws, and it becomes ineffective.
> Is there any other good realistic way?
>
> Regards,
>                                                    Atsushi maeda.
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170430/c9a99b8b/attachment.htm>