[sdiy] How to mount of module

[Jarno Verhoeven]

Drill first, that'll prevent splitting the wood rails.

Verzonden vanaf mijn Samsung-apparaat

-------- Oorspronkelijk bericht --------
Van: shine32 <shine32 at kr.tcp-ip.or.jp> 
Datum: 30-04-2017  15:16  (GMT+01:00) 
Aan: synth-diy at synth-diy.org 
Onderwerp: [sdiy] How to mount of module 

Hi Lists,

I am using the 904A VCF by M.C.E., and three kinds of hand made VCF.
My own VCF is three types ,4 stage cascade using NJM 13600, state  
variable type connected in 2 stages using SSM2164 and transistor type  
ladder type of mini moog type.
I made the demo.
https://www.youtube.com/watch?v=I14fRV-Kadc

Now, I have some question.
It is a way of attaching each module to a new wooden case, either  
directly attached or mounted on a metal bar for mounting.
When installing directly, I have experienced the trouble that the screw  
hole spreads out with wood screws, and it becomes ineffective.
Is there any other good realistic way?

Regards,
                                                   Atsushi maeda.
_______________________________________________
Synth-diy mailing list
Synth-diy at synth-diy.org
http://synth-diy.org/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170430/f68e5883/attachment.htm>