[sdiy] Looking for an ADC

[john slee]

If this is to be used to drive the select lines of a switch, as hinted at
recently... maybe an ATmega328 or similar? You should be able to drive at
least four 8-way switch ICs with one microcontroller.

Could also use a larger quantity of the ATtiny family ICs (eg. ATtiny84),
but I specifically picked the ATmega328 because you can use a super-cheap
eBay Arduino Uno R3 knockoff for easy prototyping

John

On 27 April 2017 at 19:57, Elaine Klopke <functionofform at gmail.com> wrote:

> Hey all,
>
> Does anyone have any recommendations for a cheap ADC chip that's
> thru-hole? Preferably 6-8 bit parallel output.
>
> Thanks,
>
> Elain
>
> Sent from my iPhone
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170428/32a7eda0/attachment.htm>