[sdiy] Drum sample playback

[Scott Gravenhorst]

music.maker at gte.net wrote:
>
>rsdio at audiobanshee.com wrote:
>>Anyone who thinks the Tsunami is too expensive should back up 
>>their claim and manufacture it for less. I don't see what's 
>>stopping anyone from grabbing the Eagle files and parts lists and 
>>making this in China for whatever the going price would be. Many 
>>PCB fabrication houses will take Eagle files, so you don't even 
>>need to do any design work. I'm reminded of our popular saying, 
>>"photos, or it didn't happen" - but the variation here would be, 
>>"offer the same product for less money, or stop complaining that 
>>the price isn't cheap enough." 
>>
>>As for comparing the Tsunami to a hardware sampler, that's a poor 
>>trade. The Tsunami is a bare board that could be shorted out by 
>>dropping your keys, the conductive part of a cable plug, or just 
>>about anything on the unprotected board. A used hardware sampler 
>>comes with a case that at least makes the thing reasonably 
>>robust. 
>
>Very good points.  Some of this might be just individual differences in evaluation of
>products (which is nothing more than personal opinion).  I know musicians who
>complain about the price of gear no matter what  -  it's what they do.  It seems
>worse when the individual in question doesn't have a day job or has one with low pay,
>so that much can be built into a skinny wallet.  I just bought a Tsunami (paid $80 I
>think) and thought the price was quite good.  As someone else pointed out - look at
>the price and what the board does in comparison to what a commercial sampler does and
>costs.


And I've got a nice plastic case for it...  because yes, a bare board in my "lab"/"studio" could
be a problem...


>>
>>On Apr 15, 2017, at 11:35 AM, Quincas Moreira <quincas at gmail.com> wrote:
>>> There are two other boards that are cheaper, the original Wav 
>>trigger and the MP3 trigger. I agree that 70 bucks is a bit 
>>steep, but a lot of R&D went into this, two companies are 
>>involved, etc... All is relative, if you compare it with a 
>>hardware sampler with similar capabilities it's actually quite 
>>cheap! > > On Sat, Apr 15, 2017 at 12:34 PM, cheater00 cheater00 
>><cheater00 at gmail.com> wrote: > To get back on topic. I think $70 
>>for a board like this is too much - > I think it should be 
>>cheaper - I wonder if there are alternatives that > do the same 
>>thing, but less expensively? I appreciate that they had to > 
>>write the verilog, lay the board out, etc, but I think that this 
>>> should be much more economical. It's a simple module. > > We 
>>should get the chinese hooked on analog synths. I bet a lot of 
>>fun > stuff would come out of that. > > On Sat, Apr 15, 2017 at 
>>7:09 PM, Gordonjcp <gordonjcp at gjcp.net> wrote: > > On Sat, Apr 
>>15, 2017 at 11:14:16AM -0400, Mike HEQX wrote: > >> I was talking 
>>about the math required to design something complex > >> where a 
>>lot of components are interacting simultaneously, and > >> 
>>predict what it will do before you build it. Probably in the area 
>>of > >> high level functions is where I die out. As you eluded 
>>to, the > >> basics of electronics is basic math and basic 
>>functions. That only > >> gets you so far though. > > > > How do 
>>you design a bacon roll? There's all the simultaneous reaction 
>>between the bacon and the butter, and the butter and the bread. 
>>Do you put ketchup on it, and if you do how much? There's a whole 
>>new bunch of interactions there. > > > > Or do you just go with 
>>the idea that the basic principle of bacon rolls is well enough 
>>known that by making a few simple assumptions you can devise a 
>>roll that is both practical, repeatable and - most importantly - 
>>delicious? > > > > -- > > Gordonjcp MM0YEQ > 
>>
>>_______________________________________________
>>Synth-diy mailing list
>>Synth-diy at synth-diy.org
>>http://synth-diy.org/mailman/listinfo/synth-diy
>>
>
>-- ScottG
>________________________________________________________________________
>-- Scott Gravenhorst
>-- http://scott.joviansynth.com/
>-- When the going gets tough, the tough use the command line.
>-- Matt 21:22
>
>_______________________________________________
>Synth-diy mailing list
>Synth-diy at synth-diy.org
>http://synth-diy.org/mailman/listinfo/synth-diy
>

-- ScottG
________________________________________________________________________
-- Scott Gravenhorst
-- http://scott.joviansynth.com/
-- When the going gets tough, the tough use the command line.
-- Matt 21:22