[sdiy] 13-pin synth connector part numbers?

[rsdio at audiobanshee.com]

Thank you!

I am familiar with the CUI manufacturer. I use their MIDI jacks: SDS-50J

I see the Mouser also carries the SDD-130J.

http://www.mouser.com/Search/ProductDetail.aspx?R=SDD-130Jvirtualkey51780000virtualkey490-SDD-130J

Now I just have to design a quick +/-7V supply for the 13-pin standard and the PCB should be easy…

I really appreciate everyone's help with this search.

Brian


On Apr 3, 2017, at 11:06 PM, Ullrich Peter <Peter.Ullrich at kapsch.net> wrote:
> 
> And here for the jack:
> 
> http://www.digikey.com/product-detail/en/cui-inc/SDD-130J/CP-2313-ND/252012
> 
> and they also have the connector at Digikey:
> 
> http://www.digikey.com/product-detail/en/cui-inc/SD-130/CP-1013-ND/252010
> 
> Ciao
> Peter
> 
> 
> -----Ursprüngliche Nachricht-----
> Von: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] Im Auftrag von rsdio at audiobanshee.com
> Gesendet: Dienstag, 04. April 2017 01:43
> An: *SYNTH DIY <synth-diy at synth-diy.org>
> Betreff: [sdiy] 13-pin synth connector part numbers?
> 
> Hello,
> 
> Can anyone tell me where to buy 13-pin jacks for interfacing with guitars like the Godin SynthAccess and Roland GK-2/3 MIDI adaptors? I'm not looking to mount inside the guitar itself, but on the other end where the guitar attaches to other electronics.
> 
> I did a quick search on Mouser, and what I see are 13-pin DIN connectors with different arrangements of pins. I'm not finding the horizontal stacked pins (4 each for the top 3 rows and then the 1 remaining pin on the 4th row).
> 
> Is DIN the wrong term? Is there another category that would include the Roland divided pickup standard connector?
> 
> I would prefer to find a PCB-mount jack for simplicity, but at this point I'm willing to hand-wire panel-mount jacks if that's all that's available.
> 
> Brian
> 
> p.s. In case it's not obvious, I'm working on making an adaptor for attaching my various guitars to various synths, including virtual synths. The 13-pin cable that I hacked apart and soldered 7 TRS jacks onto is working with my MOTU interface, but is not quite sturdy enough to go out in public on any kind of stage. :-(
>