[sdiy] 13-pin synth connector part numbers?

[Tony K]

> On Apr 3, 2017, at 7:42 PM, rsdio at audiobanshee.com wrote:
> 
> Hello,
> 
> Can anyone tell me where to buy 13-pin jacks for interfacing with guitars like the Godin SynthAccess and Roland GK-2/3 MIDI adaptors? I'm not looking to mount inside the guitar itself, but on the other end where the guitar attaches to other electronics.
> 
> I did a quick search on Mouser, and what I see are 13-pin DIN connectors with different arrangements of pins. I'm not finding the horizontal stacked pins (4 each for the top 3 rows and then the 1 remaining pin on the 4th row).
> 
> Is DIN the wrong term? Is there another category that would include the Roland divided pickup standard connector?
> 
> I would prefer to find a PCB-mount jack for simplicity, but at this point I'm willing to hand-wire panel-mount jacks if that's all that's available.
> 
> Brian
> 
> p.s. In case it's not obvious, I'm working on making an adaptor for attaching my various guitars to various synths, including virtual synths. The 13-pin cable that I hacked apart and soldered 7 TRS jacks onto is working with my MOTU interface, but is not quite sturdy enough to go out in public on any kind of stage. :-(
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy