[sdiy] low supply voltage dual opamp ??? solved..
Jean-Pierre Desrochers
jpdesroc at oricom.ca
Wed Sep 21 15:01:32 CEST 2016
Thanks to you all.. specially Paul..
The Microchip MCP6002 will effectively do the job here..
(But I still don't understand the "690 055" lettering on the original
8SOIC chip... )
JP
***************************************
Le 2016-09-21 07:39, Jean-Pierre Desrochers a écrit :
> I'm back guys with my request..
> Paul suggested it was an OPA690.
> Well it looks it's not.
> The OPA690 is a single opamp.
> The one I need to replace is a dual opamp
> (same pinout as the TL072.. not TL071).
> Both outputs are on pins 1 and 7.
> Supply pins are 4 and 8.
> So I'm back where I was from start.
> I need a dual opamp that:
> - runs on 5vdc
> - low power (powered with AAA battery 1.5v stepped up to 5vdc for all
> circuit)
> - 8SOIC package
>
> Any idea the ship that would do ??
>
> ****************************************************************************
> *
>
> -----Message d'origine-----
> De : Paul Schreiber [mailto:synth1 at airmail.net]
> Envoyé : 20 septembre 2016 17:58
> À : 'Jean-Pierre Desrochers'; synth-diy at dropmix.xs4all.nl
> Objet : RE: [sdiy] low supply voltage dual opamp ???
>
> OPA690. The 055 is the date code
>
> Paul S.
>
> -----Original Message-----
> From: Synth-diy [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of
> Jean-Pierre Desrochers
> Sent: Tuesday, September 20, 2016 4:55 PM
> To: synth-diy at dropmix.xs4all.nl
> Subject: [sdiy] low supply voltage dual opamp ???
>
> I need a low voltage dual opamp for a wireless microphone That runs with one
> AAA battery. There is a step-up supply voltage circuit that rise the 1.5v to
> 5vdc to supply all the remote circuit including a dual opamp (single supply
> used). This opamp needs to be changed.
> All I can say about this opamp is that the case is a 8SOIC and the pinout is
> the same as a TL072. The lettering on the case is :
> 690 followed by 055 (or D55 ???).
> So I'm looking for a low supply voltage, low power and quiet dual opamp to
> replace it.
> Any idea ?
> Thamks.
> JP
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy [1]
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy [1]
--
« L'indépendance, c'est comme un pont :
avant, personne n'en veut, après, tout le monde le prend. »
Félix Leclerc
Links:
------
[1] http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20160921/b06f0a86/attachment.htm>
More information about the Synth-diy
mailing list