[sdiy] Synton Syrinx

[Peter Pearson]

Board pics won't do you much good.  They scratched the part numbers off all
the ICs on those.

On Thu, Sep 1, 2016 at 2:49 AM, <rsdio at audiobanshee.com> wrote:

> Hmm, if you give me a Synton Syrinx, I'll take it apart and photograph it!
> I'll probably even fill out the schematics with the missing information.
> What? Nobody has a Syrinx laying around for donation? ;-)
>
>
> On Aug 31, 2016, at 10:37 PM, Nathan Trites <nathan at idmclassics.net>
> wrote:
> > I've been looking for a parts list for those schematics, as well.
> >
> > I've checked with a handful of people over the years and never had any
> luck, or anyone willing to let me take one apart to get some high res
> photos of the boards!
> >
> > On Wed, Aug 31, 2016 at 5:12 PM, Tom Wiltshire <tom at electricdruid.net>
> wrote:
> >> There's a set of schematics for this rare beast circulating on the
> interwebz, but the schematics only give part references not values.
> >>
> >> Has anyone ever seen a parts list for this synth that would allow the
> resistor/capacitor values to be filled in?
> >>
> >> Thanks,
> >> Tom
> >>
> >> PS: CEM3340 investigations again. Syrinx uses two.
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20160902/d12cc640/attachment.htm>