[sdiy] Debugging ADAT

[ackolonges]

Thanks a lot everyone for your great advice.


Between checking the MOTU outputs for clues, examining the patent (US 5297181), and checking against the reverse-engineered frame layout, I'm bound to figure something out.


________________________________
From: Synth-diy <synth-diy-bounces at dropmix.xs4all.nl> on behalf of Joe Grisso <jgrisso at det3.net>
Sent: Saturday, October 15, 2016 6:47 PM
Cc: synth diy
Subject: Re: [sdiy] Debugging ADAT

All,

There is an ADAT specification floating around that was from Alesis, I've got a paper copy here but can't legally share it. However, there is a project at ACKspace that has the layout of an entire ADAT frame, and also has some VHDL for an ADAT decoder if you're interested.

https://ackspace.nl/wiki/ADAT_project
ADAT project - Hackerspace ACKspace<https://ackspace.nl/wiki/ADAT_project>
ackspace.nl
Project: ADAT project; State Completed Members Danny Witberg GitHub No GitHub project defined. Add your project here. Description This project descibes the ADAT protocol



-Joe

On Fri, Oct 14, 2016 at 2:46 PM, Gordonjcp <gordonjcp at gjcp.net<mailto:gordonjcp at gjcp.net>> wrote:
On Fri, Oct 14, 2016 at 09:22:41PM +0000, ackolonges wrote:
> Hi all,
>
>
> I was wondering if anyone here knows much about the ADAT protocol or can recommend any resources that describe the bitstream requirements in detail?
>

Apparently the only real source of documentation is to read the ADAT patent...

--
Gordonjcp MM0YEQ

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl<mailto:Synth-diy at dropmix.xs4all.nl>
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy



--
Joe Grisso
Detachment 3, Ltd.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20161016/eb7bf5a1/attachment.htm>