[sdiy] My next oscilloscope...

[sleepy_dog at gmx.de]

Sounds at least some of the points are covered by this one:

Rigol DS1054Z
http://www.batronix.com/shop/oscilloscopes/Rigol-DS1054Z.html

It's the lowest bandwidth (and thus cheapest) model of that series.
The series has much higher quality than the Owon stuff (I've seen tests 
& teardowns of).

Steve


> Hello all,
>
> My Owon PDS 5022S 25MHz is on the way out - screen is slowly dying and I'd like to replace it with something better anyway so it's 'scope recommendation time again!
>
> What I'd like:
>
> - 3-4x Channels - increasingly needing to view 2x Inputs & 1x Output or Input, CV, Output, etc
> - Storage for checking low frequency stuff
> - Much better screen resolution - so not every single waveform looks slightly pixelated - especially when I zoom in
> - Better measurement resolution - e.g. the multimeter function, which I use all the time, is limited to 0.08V increments
> - Good price - I'm a lone operator on a tight budget - not a tech startup with a millionaire investor
>
> Working in analogue/cv/audio domain - but am doing some stuff that is requiring a higher level of accuracy/clarity than the Owon was giving me.
>
> So firstly - recommendations for something that might be suitable and secondly since I'm after 3x channels - might I be better off spending my money on a budget 2x CH and a decent 1x CH?
>
> Any advice - much appreciated.
>
> Ta,
>
> / J
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>