[sdiy] My next oscilloscope...

[Tom Bugs]

Dunno whether the HP 54624A could be worth a look - I picked one up 
quite recently though my current life hasn't allowed me to use it much 
so far.
4 channel and fairly compact for an oldish scope.
Everything I read made me think it sounded great and it has been nice in 
the occasional use I've had so far.


On 06/10/2016 20:36, Justin Owen wrote:
> Hello all,
>
> My Owon PDS 5022S 25MHz is on the way out - screen is slowly dying and I'd like to replace it with something better anyway so it's 'scope recommendation time again!
>
> What I'd like:
>
> - 3-4x Channels - increasingly needing to view 2x Inputs & 1x Output or Input, CV, Output, etc
> - Storage for checking low frequency stuff
> - Much better screen resolution - so not every single waveform looks slightly pixelated - especially when I zoom in
> - Better measurement resolution - e.g. the multimeter function, which I use all the time, is limited to 0.08V increments
> - Good price - I'm a lone operator on a tight budget - not a tech startup with a millionaire investor
>
> Working in analogue/cv/audio domain - but am doing some stuff that is requiring a higher level of accuracy/clarity than the Owon was giving me.
>
> So firstly - recommendations for something that might be suitable and secondly since I'm after 3x channels - might I be better off spending my money on a budget 2x CH and a decent 1x CH?
>
> Any advice - much appreciated.
>
> Ta,
>
> / J
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>

-- 
BugBrand LTD
UK company No. 07199808
VAT No. GB 988 2629 57
1 Ninetree Hill
BRISTOL BS1 3SB
United Kingdom
www.bugbrand.co.uk