[sdiy] SDIY Archives / dual-output bench power supply

Paul Schreiber synth1 at airmail.net
Thu Nov 10 21:21:11 CET 2016

Leader LPS-151 or 152. SynthTech approved! Used for last 20yrs or so.


Paul S.



From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of Byron G. Jacquot
Sent: Thursday, November 10, 2016 2:11 PM
Subject: Re: [sdiy] SDIY Archives / dual-output bench power supply


No idea about the archives.


But I can recommend a couple of bench supplies:


HP 6205b or c

HP 6236b


The `05 is two independently adjustable rails at 600 mA each.

The `36 is a 0-6V rail, and dual tracking rails (+ & - in a mirror-image configuration) at 500 mA.


Used, neither is especially expensive.  They're not the cheapest, but they're stable and solidly made, putting some extra check marks in the "cheerful" column.



-Byron Jacquot

-----Original Message----- 
From: Eric Frampton 
Sent: Nov 10, 2016 12:37 PM 
Subject: [sdiy] SDIY Archives / dual-output bench power supply 

I’m looking for our archives. I found Cary’s copy of them at retrosynth.com, but they cut off at 2011. Is there a searchable one that is more current?


Specifically, I’m trying to remember what the suggestions were for a cheap ’n’ cheerful regulated dual (bipolar) bench power supply. My single output one ain’t cuttin’ it anymore.


I’m in the U.S.





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20161110/1e3a3af1/attachment.htm>

More information about the Synth-diy mailing list