[sdiy] test/first

[Magnus Danielson]

DH7FET de SA0MAD,

On 10/31/2016 09:40 PM, Florian Teply wrote:
> SA0MAD de DH7FET
>
> Am Mon, 31 Oct 2016 21:11:54 +0100
> schrieb Magnus Danielson <magnus at rubidium.dyndns.org>:
>
>> DH7FET de SA0MAD,
>>
>> On 10/31/2016 08:47 PM, Florian Teply wrote:
>>> Am Mon, 31 Oct 2016 07:26:56 +0100
>>> schrieb Magnus Danielson <magnus at rubidium.dyndns.org>:
>>>
>>>> I give you 59,
>>>> 73 de SA0MAD
>>>>
>>> Shouldn't that be 599, given that transmission of individual bits
>>> is as close as it gets to morse code?
>>
>> Considering that the third value in the RST would be tone, and there
>> is no tone to be heard in the CW in this case, giving a 5 in
>> Readability and 9 in strength seems relevant. :)
>>
> Oh well, and I thought some nice clean tone would sound someplace in
> Synth-DIY. But that could also be mains hum coupling into the synth ;-)

Feel free to synthesize a good tone to go along with the message, but 
the signal report for tone would not need to include it. :)

Then again, reporting 599 on CW is common enough but maybe not so useful 
at all times.

73 de SA0MAD