[sdiy] non-mechanical switching solutions

[Mattias Rickardsson]

I've had similar construction dilemmas and sadly/intriguingly this might be
the best solution so far:

Den 27 juni 2016 4:49 em skrev "Gordonjcp" <gordonjcp at gjcp.net>:
>
> Your nine pole rotary switch is by far the most expensive component.
Opamps are cheap, discrete trannies are cheap, passives are hell of a cheap.
>
> Build four filters, one with each capacitance range, and pick whichever
output you want to use.  If you use surface-mount parts the whole thing
will still be smaller than the original.

:-)

/mr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20160628/febcb30f/attachment.htm>