[sdiy] Oscilloscope on a Budget 200
Roman Sowa
modular at go2.pl
Wed Jun 1 11:48:22 CEST 2016
Or Hantek PSO2020 - it's cool little penscope, so you hold the little
device in your hand, and instead of regular probe cable, there's USB cable.
In contrary to other USB scopes, there are physical controls on the
device to adjust sensitivity, timebase, horizontal and vertical shift.
I have other 4-ch USB scope from Hantek and operating it with a mouse is
such a pain that I use it only when I need 4 channels.
I don't have PSO2020 (yet, just foud out about it today) but it's so
sweet I can't keep my $100 in my pocket not to buy it.
Roman
W dniu 2016-06-01 o 11:00, Steve pisze:
> Well, before you buy some perhaps dodgy DIY kit, you might as well buy
> something like this:
>
> Hantek 6022BE
> https://www.amazon.com/Hantek-HT6022BE20Mhz-Digital-Oscilloscope-Bandwidth/dp/B009H4AYII?ie=UTF8&*Version*=1&*entries*=0
>
> A PC / USB based scope. Not as nice usability wise than a stand-alone scope.
> But at least it has some features... and it's nice that it has 20 MHz
> bandwidth (well, with 48MS/s I doubt 20MHz signals can be looked at
> nicely... but a few MHz at least).
> I would not like to be restricted to some scope that does only kHz even
> for audio. Why? E.g. because perhaps you'd like to make sure that your
> circuits do indeed output only hearing range frequencies.
>
> Steve
>
> *Gesendet:* Mittwoch, 01. Juni 2016 um 05:09 Uhr
> *Von:* "Trevor Cunningham" <chalktech at gmail.com>
> *An:* Rob <roomberg at ptd.net>
> *Cc:* "synth-diy at dropmix.xs4all.nl" <synth-diy at dropmix.xs4all.nl>
> *Betreff:* Re: [sdiy] Oscilloscope on a Budget 200
> Great advice, thank you.
>
> On Tuesday, May 31, 2016, Rob <roomberg at ptd.net> wrote:
>
> $200 is a little bit too much to spend on a tool.... for a lot of
> people.
>
> I definitely could not afford a $200 analog scope 20 years ago when
> I had 3 teenagers to feed.
> But I did find a 20mhz scope in a flea market that works great and
> it only cost me $20.
>
> I bought the cheap digital scope for KILOhertz audio frequency
> circuits.
> Its just a really good match for cash strapped newbies playing with
> electronics who are not
> straying into radio frequencies.
>
> I wish I had one of these 50 years ago.
> I would have learned a lot more about electronics.
>
>
> On 05/31/2016 09:04 AM, Mattias Rickardsson wrote:
>
> When it comes to oscilloscopes I have only two recommendations:
>
> Spend 200 bucks on an old analog scope and sell it if you don't
> like it,
> or
> spend 200 bucks on a new digital scope and throw it if you don't
> like it.
>
> I know which alternative I'd prefer, and it's not just because I
> like
> old analog scopes. ;-)
>
> PS: Here's my CV: https://goo.gl/photos/TFh1LVewFRxWPfUFA
>
> /mr
>
> On 31 May 2016 at 11:05, Gordonjcp <gordonjcp at gjcp.net> wrote:
>
> On Tue, May 31, 2016 at 11:22:23AM +0300, Trevor Cunningham
> wrote:
>
> If being cheap in the short will just cost me money in
> the long run, please
> advise. I'm just looking for a scope that will be
> reliable with modular
> kits. The more money I have to build kits with, the
> happier I am.
>
> Buy a dual-trace analogue 'scope that will go to about 20MHz
> from someone near enough to go round and see it working.
> There's this online auction site that'll probably help there.
>
> Digital 'scopes are either hideously expensive or terribly
> limited.
>
> My 20MHz Iwatsu dual-trace is just about never switched off...
>
> --
> Gordonjcp MM0YEQ
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
> _______________________________________________ Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
More information about the Synth-diy
mailing list