[sdiy] IEC C10 sockets?

[Richie Burnett]

Why ground the chassis if it wasn't grounded in the original design? Presumably it's a class-2 power supply so earthing the 0v line would seem to risk introducing a ground loop?

-Richie,

Sent from my Xperia SP on O2

---- Oakley Sound wrote ----

>I'd replace it with a three way IEC and properly ground the rear 
>chassis. However, the hole in the panel will need to made larger which 
>is a bit of a pain. Quite often two way and three way IEC sockets are 
>interchangeable but the Korg ones do seem a little smaller so the hole 
>will need increasing in height.
>
>Tony
>
>www.oakleysound.com
>_______________________________________________
>Synth-diy mailing list
>Synth-diy at dropmix.xs4all.nl
>http://dropmix.xs4all.nl/mailman/listinfo/synth-diy