[sdiy] VSM201 Vocorder Question

[Richie Burnett]

I think the "colouring" that you mention might be quite common in vocoders. I found "perfect reconstruction" very hard to achieve when designing the vocoder bands to be sufficiently selective to work well as a vocoder.

I guess a vocoder is an effect not an EQ, so perfect reconstruction can be sacrificed here. Deep notches are also far less objectionable than sharp peaks in the combined response, so I sharpened up the Q of my filters, at the expense of getting a couple of dB dips between bands.

-Richie,

Sent from my Xperia SP on O2

---- Simon Brouwer wrote ----

>_______________________________________________
>Synth-diy mailing list
>Synth-diy at dropmix.xs4all.nl
>http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20160102/1a82c69e/attachment.htm>