[sdiy] IDC Header 'cover'

[Tom Wiltshire]

Yeah, I was thinking some sort of foam too. Any sort of actual connector is going to cost real money. A bit of foam would be peanuts. Jam a piece of polystyrene on it.

On 2 Feb 2016, at 14:19, Florian Anwander <fanwander at mnet-online.de> wrote:

> 
> 
> Am 02.02.2016 um 15:08 schrieb Justin Owen:
> 
>> Don't want to jumper or connect pins or have it act as any type on inter-board
> 
> Put a jumper on it, but only on one side
> If minor resistance is not disturbing: stick some piece of antistatic foam on it.
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy