[sdiy] Odp: Re: SAW core VCO flyback time

[Roman]

One ramp is going up, and when reaches maximum, the MUX switches to 2nd ramp, which then starts exactly at this moment.  Meanwhile 1st ramp is slowly decaying by not-so-fast switch, let's say it takes a few microseconds, and is held at 0V untill the 2nd ramp reaches its maximum, and MUX switches back again to 1st ramp.  So reset FETs are not driven by short pulses but out of phase square signal. MUX switches between ramps making the reset slope fast as lightning.  I have this core somewhere in one of my notebooks, or maybe loose paper. Never built it hough as it was a bit overkill.   Roman  Dnia 27 sierpnia 2016 19:37 Tom Wiltshire <tom at electricdruid.net> napisał(a):
                  How would this work, Rick? I'm not seeing it.   Does it need the two ramps to be running at half the output rate so that you always switch in the middle of the ramp? And don't you just swap flyback time for switching time as the potential glitch?   Thanks,  Tom   On 27 Aug 2016, at 17:49, Rick Jansen <rick.jansen at xs4all.nl> wrote:   You could do a dual integrator and alternate their outputs: no flyback time at all.   rick    On 27/08/2016 18:27, Mattias Rickardsson wrote:  On 26 August 2016 at 06:42, David G Dixon <dixon at mail.ubc.ca> wrote:  > I stopped building sawcore VCOs because I didn't like flyback.  That's why I  > only build tricores now, and shape them into saws.  They sound better  > anyway, and sync in a more interesting way.   I'm not a big fan of them either, as far as tracking and waveshaping  is concerned.   But regarding the sound - I made a very bad (meaning slow flyback) saw  core, and now people shout that it sounds so great and they want it in  more designs.   Alas, the ever so unrewarding nature of good engineering! ;-)   /mr  ______________________________  Synth-diy mailing list   Synth-diy at dropmix.xs4all.nl  dropmix.xs4all.nl dropmix.xs4all.nl   ______________________________  Synth-diy mailing list   Synth-diy at dropmix.xs4all.nl  dropmix.xs4all.nl dropmix.xs4all.nl   ______________________________  Synth-diy mailing list   Synth-diy at dropmix.xs4all.nl  dropmix.xs4all.nl dropmix.xs4all.nl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20160827/c5e6430c/attachment.htm>