[sdiy] switching without popping

[Chris Juried]

Could you add a FET, to your switching circuit, shunted to ground, through a relatively small cap, say 47uf, or so?  Sincerely,   
  Chris
Audio Engineering Society (AES) Member  
InfoComm-Recognized AV Technologist
http://www.JuriedEngineering.com (Juried Engineering, LLC.)
http://www.TubeEquipment.com (Tube Equipment Corporation)
http://www.HistoryOfRecording.com (History of Recording)

This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any distribution or copying of this email, and any attachments thereto, is strictly prohibited. If you have received this email in error, please immediately notify me at (754) 300-9972 and permanently delete the original and any copy of any e-mail and any printout thereof.


      From: Tom Wiltshire <tom at electricdruid.net>
 To: Richie Burnett <rburnett at richieburnett.co.uk> 
Cc: Synth-Diy <synth-diy at dropmix.xs4all.nl>
 Sent: Monday, April 18, 2016 6:24 AM
 Subject: Re: [sdiy] switching without popping
   
In my view this is best response yet. Simple and effective.

On 17 Apr 2016, at 21:16, "Richie Burnett" <rburnett at richieburnett.co.uk> wrote:

> Instead of using a switch for A/B comparisons, use a linear pot to cross-fade between the two sources (like the cross-fader in a DJ mixer.)
> 
> This won't pop because even with a good firm swipe the pot will still take 20ms or more to travel from one end to the other.
> 
> -Richie,
> 
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2016.0.7539 / Virus Database: 4545/12053 - Release Date: 04/17/16 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20160418/4142b2dd/attachment.htm>