[sdiy] switching without popping

[Ove Ridé]

Yep, this! Make sure you don't have a DC offset on either of the
signals you're switching between before concluding that you need a
different switching scheme.

On 18 April 2016 at 04:15, Paul Perry <pfperry at melbpc.org.au> wrote:
> There is always a hell of a pop if you switch between two sources that
> have a different DC offset,
> So (depending on whether the circuits will allow this) a bleed resistor to
> ground
> on the switch side of one or both output caps should do it (maybe you will
> need to add a cap, if there is none there to start with.)
>
> paul perry melbourne Australia
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy



-- 
/Ove

Blog: <http://blog.gg8.se/>

"Here is Evergreen City. Evergreen is the color of green forever."