[sdiy] looking for a joystick

Jason Proctor jason at redfish.net
Tue Apr 5 23:23:35 CEST 2016


also, according to Mr Doepfer, the joysticks used by the 174 module were
the ALPS RKJXC1210, and are no longer in production.

life is tough for joystick people!



On Tue, Apr 5, 2016 at 2:22 PM, Jason Proctor <jason at redfish.net> wrote:

> interestingly, according to this thread --
>
> http://www.99musik.se/showthread.php?325528-Prophet-VS-joystick-trubbel
>
> -- that's the joystick used by Flights and Intellijel.
>
> do you know how much the samples are?
>
>
>
> On Tue, Apr 5, 2016 at 1:28 AM, Tom Bugs <admin at bugbrand.co.uk> wrote:
>
>> I made this suggestion a few months back for a similar query::::
>> http://www.tbm-japan.com/english/product/07joy.html
>> You then need to order samples - not entirely cheap once you factor in
>> shipping etc, but they're the best I've come across in the reasonable price
>> categories.
>>
>> Maybe someone should urge Thonk &/or Synthcube to stock them?
>>
>>
>> On 05/04/2016 07:50, Roman Sowa wrote:
>>
>>> There are quite a few versions of those joysticks in price ranges from
>>> 10 to over 100EUR and they look exactly the same on pictures. I've checked
>>> few of the cheap ones, and they are no good. With the rubber seal around
>>> the stick it still returns to mid position even if you remove the springs.
>>> BTW, removing springs in them is very easy.
>>> When I removed the rubber, friction was too loose, and also it had
>>> significant dummy-zone, I mean the small travel of the stick before
>>> potentiometer starts moving.
>>>
>>> Roman
>>>
>>> W dniu 2016-04-04 o 23:27, Jason Proctor pisze:
>>>
>>>> yes, certainly i could find one that is close and hack on it, but since
>>>> my need isn't urgent, i'll likely hold out for something that's close.
>>>> i'm trying to dig a part number out of Flights and Intellijel, but
>>>> nothing yet.
>>>>
>>>> this is the closest i've found
>>>>
>>>>
>>>> http://www.ebay.com/itm/Joystick-potentiometers-2x-100k-ohms-X-Y-Axis-/151947357956?hash=item2360c4af04:g:iHwAAOSwKtlWlINC
>>>>
>>>>
>>>>
>>>> On Mon, Apr 4, 2016 at 2:16 PM, <sleepy_dog at gmx.de
>>>> <mailto:sleepy_dog at gmx.de>> wrote:
>>>>
>>>>
>>>>     Maybe that is too involved / fumbly if you're looking for a ready
>>>>     solution (OTOH, you said small number...),
>>>>     but:
>>>>     Maybe some of those cheapies can be opened and the springs removed?
>>>>     And if the lever is not light enough for the potentiometers to hold
>>>>     it in place, one could add friction, e.g. by making a disc out of
>>>>     felt or similar, putting a hole in it slightly less in diameter than
>>>>     the potentiometer axis, put it around the axis and glue it to the
>>>>     case? If it's that accessible...
>>>>
>>>>     Steve
>>>>
>>>>
>>>>
>>>>     Am 04.04.2016 um 22:52 schrieb Jason Proctor:
>>>>
>>>>>     thanks for the response.
>>>>>
>>>>>     i did look at adafruit and sparkfun and didn't find anything
>>>>>     appropriate. one constraint is that they can't be spring-loaded -
>>>>>     that is, once set in a position, they have to stay there. also
>>>>>     have to be panel mount and reasonably small footprint.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>     On Mon, Apr 4, 2016 at 1:20 PM, <sleepy_dog at gmx.de
>>>>>     <mailto:sleepy_dog at gmx.de>> wrote:
>>>>>
>>>>>         I don't suppose something like those will do? (like the cheap
>>>>>         3,95 $ one...)
>>>>>
>>>>>         https://www.sparkfun.com/search/results?term=joystick
>>>>>
>>>>>         http://www.dx.com/s/joystick+diy
>>>>>
>>>>>         Steve
>>>>>
>>>>>
>>>>>         Am 04.04.2016 um 20:58 schrieb Jason Proctor:
>>>>>
>>>>>>         hi all
>>>>>>
>>>>>>         i'd like to source a small number (< 10) of a panel mount
>>>>>>         joystick like the one on the Flights of Harmony Choices or
>>>>>>         Intellijel Planar Euro modules. neither Flight nor Dan can
>>>>>>         currently provide them, however. i've been through Mouser and
>>>>>>         Digikey and nothing seems appropriate. anyone know a good
>>>>>>         joystick source?
>>>>>>
>>>>>>         thanks for any help with this!
>>>>>>         J
>>>>>>
>>>>>>
>>>>>>
>>>>>>         _______________________________________________
>>>>>>         Synth-diy mailing list
>>>>>>         Synth-diy at synth-diy.org <mailto:
>>>>>> Synth-diy at synth-diy.org>
>>>>>>         http://synth-diy.org/mailman/listinfo/synth-diy
>>>>>>
>>>>>
>>>>>
>>>>>         _______________________________________________
>>>>>         Synth-diy mailing list
>>>>>         Synth-diy at synth-diy.org <mailto:
>>>>> Synth-diy at synth-diy.org>
>>>>>         http://synth-diy.org/mailman/listinfo/synth-diy
>>>>>
>>>>>
>>>>>
>>>>
>>>>     _______________________________________________
>>>>     Synth-diy mailing list
>>>>     Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
>>>>     http://synth-diy.org/mailman/listinfo/synth-diy
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Synth-diy mailing list
>>>> Synth-diy at synth-diy.org
>>>> http://synth-diy.org/mailman/listinfo/synth-diy
>>>>
>>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at synth-diy.org
>>> http://synth-diy.org/mailman/listinfo/synth-diy
>>>
>>>
>> --
>> BugBrand LTD
>> UK company No. 07199808
>> VAT No. GB 988 2629 57
>> 1 Ninetree Hill
>> BRISTOL BS1 3SB
>> United Kingdom
>> www.bugbrand.co.uk
>>
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20160405/87fc8c00/attachment.html>


More information about the Synth-diy mailing list