[sdiy] Needed metal enclosure for footswitch board with 12 switches.. (16 switches finally)

[_maker]

That's an amazing price! Who was it. I'm looking to get something similar
done for an active matrix mixer, but I'm based in Ireland.

<http://WWW.MAKER.IE>
WWW. <http://www.maker.ie/>MAKER.IE

Maker Electronics Ireland Ltd.

---

A4 Sounds,

St. Joseph's Parade,

Dorset Street.

Dublin 7,

Dublin,

Ireland

--

FACEBOOK <http://www.facebook.com/makenoisemakemusic>

TWITTER <https://twitter.com/__maker>

BLOG <http://www.makenoisemakemusic.wordpress.com/>
--

All information furnished from this email is confidential and proprietary
to Maker Electronics Ireland Ltd.

On Mon, Sep 28, 2015 at 2:22 PM, Jean-Pierre Desrochers <jpdesroc at oricom.ca>
wrote:

> I finally decided to have an enclosure manufactured
> (folded 1/16" thick metal sheet) from a local company..
> It will accept 3 rows of 6 footswitches. (18 overall)
> Here is what will be done:
>
> http://www.arcenson.com/public/MIDI_foot_controller.pdf
>
> The toling + material will be around $30.00CAD overall !
>
> I think it's the best way..
>
> Thanks everybody.
> JP
>
> ***************************************************
> Jean-Pierre Desrochers jpdesroc at oricom.ca
> Thu Sep 17 20:54:19 CEST 2015
> Previous message: [sdiy] Moog multi position switches
> Next message: [sdiy] Diecast enclosure for footswitch board with 12
> switches..
> Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
>
> I'm looking for a diecast aluminum enclosure
> to build a footswitch board with 12 pushbutton switches..
> I'm looking for something like this:
>
> http://www.hammondmfg.com/1590B2_B.jpg
>
> But BIGGER !
> Something like 15"wide x 12"deep x 2"thick max.
> A slant top would be fine too.
>
> Hammond enclosures web site has a whole collection of
> diecast enclosures but they are all 'boxy' instead
> of being flat. When the enclosure is large enough
> the thickness is too high for footswitching..
>
> I found some slant enclosures but they are not large
> and deep enough and are made of 1/16" thick aluminum (not diecast)
> that would bend with many actions on the switches.
> Not very reliable..
>
> If anybody has a link on something..
> Thanks
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20150929/62987310/attachment.htm>