[sdiy] Productionisation Service for the SDIY community

[David G Dixon]

I do all my layouts in Excel, and etch my own boards.

My better designs end up as Intellijel modules, and they do the layouts
professionally.  I never learned Eagle or whatever.

The thing I hate doing is panels.
 

> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl 
> [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of 
> Needham, Alan
> Sent: Monday, September 21, 2015 9:31 AM
> To: Nathanael King; Synthcube
> Cc: Sdiy
> Subject: Re: [sdiy] Productionisation Service for the SDIY community
> 
> I think there are a couple of people who, for various reasons 
> are just happy to design stuff, build it on matrix and move on.
> Not everyone wants to waste time doing PCB layout for a one-off build!
> How does this translate into "hasn't taken basic electronics 
> theories and considerations into his design"?
> 
> 
> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl 
> [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of 
> Nathanael King <snip> Also, it's a bit strange to think that 
> someone would be able to design a circuit, but not be able to 
> lay it out, or do the necessary bits and bobs to complete the 
> circuit itself. Of course, it doesn't make them a panel 
> design pro, and make them good at customer service. Yet, I'd 
> be pretty loathe to buy an original circuit from somebody 
> that hasn't taken basic electronics theories and 
> considerations into his design.
> 
> --
> Nate King
> Paper Products Music
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> 
> _____________________________________________________________________
> The information contained in or attached to this email is 
> intended only for the use of the individual or entity to 
> which it is addressed. If you are not the intended recipient, 
> or a person responsible for delivering it to the intended 
> recipient, you are not authorised to and must not disclose, 
> copy, distribute, or retain this message or any part of it. 
> It may contain information which is confidential and/or 
> covered by legal professional or other privilege (or other 
> rules or laws with similar effect in jurisdictions outside 
> England and Wales).
> 
> The views expressed in this email are not necessarily the 
> views of Centrica plc, and the company, its directors, 
> officers or employees make no representation or accept any 
> liability for its accuracy or completeness unless expressly 
> stated to the contrary.
> 
> PH Jones is a trading name of British Gas Social Housing 
> Limited.  British Gas Social Housing Limited (company no: 
> 01026007), British Gas Trading Limited (company no: 
> 03078711), British Gas Services Limited (company no: 
> 3141243), British Gas Insurance Limited (company no: 
> 06608316), British Gas New Heating Limited (company no: 
> 06723244), British Gas Services (Commercial) Limited (company 
> no: 07385984) and Centrica Energy (Trading) Limited (company 
> no: 02877397) are all wholly owned subsidiaries of Centrica 
> plc (company no: 3033654). Each company is registered in 
> England and Wales with a registered office at Millstream, 
> Maidenhead Road, Windsor, Berkshire SL4 5GD.
> 
> British Gas Insurance Limited is authorised by the Prudential 
> Regulation Authority and regulated by the Financial Conduct 
> Authority and the Prudential Regulation Authority. British 
> Gas Services Limited and Centrica Energy (Trading) Limited 
> are authorised and regulated by the Financial Conduct 
> Authority. British Gas Trading Limited is an appointed 
> representative of British Gas Services Limited which is 
> authorised and regulated by the Financial Conduct Authority.
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy