[sdiy] Diecast enclosure for footswitch board with 12 switches..

[David Moylan]

1550J is probably the best diecast option but I don't think it's enough 
for 12 switches.  I'd look into the steel 1441 series.


On 09/18/2015 11:22 AM, Jean-Pierre Desrochers wrote:
>
> I'm looking for a diecast aluminum enclosure
> to build a footswitch board with 12 pushbutton switches..
> I'm looking for something like this:
>
> http://www.hammondmfg.com/1590B2_B.jpg
>
> But BIGGER !
> Something like 15"wide x 12"deep x 2"thick max.
> A slant top would be fine too.
>
> Hammond enclosures web site has a whole collection of
> diecast enclosures but they are all 'boxy' instead
> of being flat. When the enclosure is large enough
> the thickness is too high for footswitching..
>
> I found some slant enclosures but they are not large
> and deep enough and are made of 1/16" thick aluminum (not diecast)
> that would bend with many actions on the switches.
> Not very reliable..
>
> If anybody has a link on something..
> Thanks
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>