[sdiy] MIDI phantom power...over 5 pin MIDI connector ?

[Roman Sowa]

And since you have noticed by immense discussion, there's no easy solution.
As in anything abusing standards, it will work for most of the gear 
connected, but there will also be bad exceptions.

Roman

W dniu 2015-09-11 o 21:39, Jean-Pierre Desrochers pisze:
> Hi again folks,
>
> This DIY request is getting toooooo deeeep for me...
> I was just asking for any easy solution to do it.
> Thanks anyway guys!
>
> JP
>
> -------- Message original --------
> Objet: Re: [sdiy] MIDI phantom power...over 5 pin MIDI connector ?
> Date: 2015-09-10 07:20
> De: jpdesroc <jpdesroc at oricom.ca>
> À: synth-diy at dropmix.xs4all.nl
>
> Hi all,
>
>  From my first DIY email request on that subject
> I'm just trying to 'steal' power from a MIDI out connector
> using only pins 2 & 4. I know this way I'd lose any GND references
> but I'm still asking to get new ideas from great people like you guys !
> You know, this device could have a floating GND reference.
> Doesn't matter as far as my final MIDI powered device can cope
> with it's incoming MIDI signal and send 'enough strong' MIDI info
> on it's output.
>
> JP
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy