[sdiy] ATSamD4 Breakout Board

[Jim Patchell]

I am sorry.  Not enough sleep lately.  The processor is actually the 
ATSAMD21, not D4.  Not even sure where the D4 came from in my brain.

On 11/6/2015 3:33 PM, Jim Patchell wrote:
> I have been looking for a breakout/header board for the ATSamD4E 
> microcontroller.  For those who don't know, ths is an ARM Cortex M0+ 
> processor.  I am interested in the one that has 64K of flash and 8KB 
> ram.  But so far, I have found nothing, so, I am starting to think 
> about designing my own.  The intended purpose is to use this in 
> projects that need a MIDI interface, be it the traditional one using a 
> serial port or a USB port (this part has USB).  Other features of the 
> part are it has an I2S audio interface, I2C, SPI, UART, Non Maskable 
> Interrupt.  The form factor I am thinking about is a Dip Header, and 
> the price point I am going to target to is $20.  I should mention that 
> you can get this part on an Atmel Explained Eval Board for $42, and 
> the Arduino Zero for $38.  I was wondering if there was any interest 
> in this project?
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>