[sdiy] Solder resist/mask?

[Tim Ressel]

Nail polish?
 
Tim Ressel
Circuit Abbey
503-750-9331
timr at circuitabbey.com




________________________________
From: Justin Owen <juzowen at gmail.com>
To: SDIY List <synth-diy at dropmix.xs4all.nl> 
Sent: Tuesday, March 31, 2015 4:23 AM
Subject: [sdiy] Solder resist/mask?


Hello,

Had a prototype PCB come back to me this week where the photo-resist layer wasn't properly aligned with the traces so some of them are exposed and one of them is shorting when a lead is inserted into a socket (no more traces under sockets - lesson learnt!).

If I bought something like either of these guys could I paint(?) over the exposed traces to seal them up for a few weeks until I go to the next iteration of the board?

http://uk.farnell.com/chemtronics/cm8e/solder-mask-bottle-200ml/dp/860529

http://uk.farnell.com/electrolube/epcm250/coating-peelable-mask-250ml/dp/1961584

...or any other suggestions?

Not looking for a permanent solution as I'll be redoing this board anyway - just need a few weeks worth of kludge :)

Thanks!

- J



_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy