[sdiy] Rotary switch 6 positions 60deg throw..

Jack Jackson jackdamery at hotmail.co.uk
Thu Mar 26 15:58:28 CET 2015


Hi JP,

Is the 60 degree angle important? I would suggest the adjustable stop Lorlin style switches as Dave linked to.

Best Regards,
Jack

----------------------------------------
> From: abide at dmdrafting.com
> To: jpdesroc at oricom.ca; Synth-diy at synth-diy.org
> Date: Thu, 26 Mar 2015 10:42:21 -0400
> Subject: Re: [sdiy] Rotary switch 6 positions 60deg throw..
>
> Hi JP,
>
> I'm not sure of the rotation angle, but Small Bear has a few flavors of
> rotary switch for considerably less than $25
>
> http://smallbear-electronics.mybigcommerce.com/rotary-switches-1/
>
> Maybe one of these will work? I always like to have one or two of the
> "adjustable" types laying around
>
> Dave
>
> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl
> [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Jean-Pierre
> Desrochers
> Sent: Thursday, March 26, 2015 10:31 AM
> To: Synth-diy at synth-diy.org
> Subject: [sdiy] Rotary switch 6 positions 60deg throw..
>
> Does anybody have a link to a not too expensive Rotary switch 1 pole, 6
> positions 60deg throw..
> Like this type:
> http://r.ebay.com/v0jVXJ
>
> I'm building a Hammond Scanner effect for my guitar using a real B3 scanner
> along with its vibrato line but housed in a small box that would not fit the
> original long 6 positions Chorus/vibrato switch.
> Instead I'll use relays activated by one small 6 pos. rotary switch.
> I found some but the cheaper was around $25.00US
>
> Any idea ?
>
> JP
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
 		 	   		  


More information about the Synth-diy mailing list