[sdiy] TEK scope issue 5110 ---screen only works in the far right !

cheater00 . cheater00 at gmail.com
Fri Jul 10 09:58:42 CEST 2015


Ask on the TekScopes mailing list. They will know. It's likely a shot
plugin (they're not called cards). Try another timebase. If you don't
have another timebase, but have two vertical amplifiers, put one in
the timebase slot, which will configure your scope into XY mode. This
way you can also check if the mainframe itself works okay or if the
horizontal deflection is shot.

When posting to tekscopes include photos of your plugins and scope and
include model numbers and serial numbers in the message text.

Cheers

On Mon, Jul 6, 2015 at 11:34 AM, Needham, Alan
<Alan.Needham at centrica.com> wrote:
> X deflection amp or power rails to same?
> Apparently, could be just a switch issue.
> http://www.i9t.net/5000_scopes.html
>
>
>
>
> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Dan Snazelle
> Sent: 06 July 2015 01:21
> To: Synth
> Subject: [sdiy] TEK scope issue 5110 ---screen only works in the far right !
>
> I recently was given a TEK 5110 mainframe scope
>
> Lots of fun as though it's only 2mhz, it can display up to six traces at once
>
> BUT today when hooking it up to an external time base to view my analog computer, after working perfectly for many minutes the screen went blank
>
>
> NOW....here's the problem
>
> No matter how I set it , I can only see the displayed waveforms WAYYY over in the middle right corner !
>
> Even if I mess with the position knobs till the cows come home
>
> I tried removing the mainframe cards and swapping them into other slots.  .no difference
>
> In fact only when I REMOVE all the cards does the scope DOT appear in the very center
>
>
> Any ideas?
>
>
> Thnx
>
>
>
> Sent from my iPhone
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
> _____________________________________________________________________
> The information contained in or attached to this email is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are not authorised to and must not disclose, copy, distribute, or retain this message or any part of it. It may contain information which is confidential and/or covered by legal professional or other privilege (or other rules or laws with similar effect in jurisdictions outside England and Wales).
>
> The views expressed in this email are not necessarily the views of Centrica plc, and the company, its directors, officers or employees make no representation or accept any liability for its accuracy or completeness unless expressly stated to the contrary.
>
> PH Jones is a trading name of British Gas Social Housing Limited.  British Gas Social Housing Limited (company no: 01026007), British Gas Trading Limited (company no: 03078711), British Gas Services Limited (company no: 3141243), British Gas Insurance Limited (company no: 06608316), British Gas New Heating Limited (company no: 06723244), British Gas Services (Commercial) Limited (company no: 07385984) and Centrica Energy (Trading) Limited (company no: 02877397) are all wholly owned subsidiaries of Centrica plc (company no: 3033654). Each company is registered in England and Wales with a registered office at Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD.
>
> British Gas Insurance Limited is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. British Gas Services Limited and Centrica Energy (Trading) Limited are authorised and regulated by the Financial Conduct Authority. British Gas Trading Limited is an appointed representative of British Gas Services Limited which is authorised and regulated by the Financial Conduct Authority.
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy


More information about the Synth-diy mailing list