[sdiy] Logic interfacing

[Tom Wiltshire]

The output looks like an open collector from the LM393 datasheet, so a pull-up would be the way to go.

HTH,
Tom

On 10 Feb 2015, at 15:07, Rutger Vlek <rutgervlek at gmail.com> wrote:

> Hi guys,
> 
> I breadboarded a circuit with a op amp comparator driving a DG419 analog switch. After reading this application note (http://www.analog.com/static/imported-files/application_notes/AN-849.pdf) I decided to use a LM393 instead. Can I interface it's output directly to the DG419's logic input? Or do I need additional pull-up/pull-down's?
> 
> Best,
> 
> Rutger
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy