[sdiy] diy stomp pedal question

[Dave Magnuson]

Without seeing a schematic it's hard to tell for certain... but it sounds
like a 3 terminal SPDT switch would work.    

- Full 9V to the normally closed position
- Reduced power to normally open
- Power input of the effect to the switching leg

-----Original Message-----
From: Synth-diy [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of
legion at helpwantedproductions.com
Sent: Wednesday, December 23, 2015 10:24 AM
To: synthdiy diy
Subject: [sdiy] diy stomp pedal question


-- I'm building a power starve, very simple circuit. Power supply in hits
pot and resistor which mimics "battery drain" and then out to pedal.

I want to add a stomp switch so this can bypass the drain and send full
power and then when engaged it goes to the drain setting. What stomp switch
should I use (I have six terminal and three terminal.ones). What connections
go where?

Any suggestions appreciated. Thanks
     ---------------------------------------
     NEW DAED SITE!!  -  Http://DaedSound.com
 DAED: Circuit Bent and Unusual Sound Devices "Making Something
Extraordinary from the Ordinary"

Music and Downloads at the New Online Site:
    http://davidtalento.bandcamp.com/



-- 
     ---------------------------------------
     NEW DAED SITE!!  -  Http://DaedSound.com
 DAED: Circuit Bent and Unusual Sound Devices "Making Something
Extraordinary from the Ordinary"

Music and Downloads at the New Online Site:
    http://davidtalento.bandcamp.com/



-- 
     ---------------------------------------
     NEW DAED SITE!!  -  Http://DaedSound.com
 DAED: Circuit Bent and Unusual Sound Devices "Making Something
Extraordinary from the Ordinary"

Music and Downloads at the New Online Site:
    http://davidtalento.bandcamp.com/



_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy