[sdiy] Cleaning PCBs in Ultrasonic Baths

[Chris Juried]

Hi Rob,
I am a fan of ultra-sonic cleaners and have been for years. Items of concern are those containing graphite and lubricants. Sincerely,   
  Chris Juried  
Audio Engineering Society (AES) Member  
InfoComm-Recognized AV Technologist
http://www.JuriedEngineering.com (Juried Engineering, LLC.)
http://www.TubeEquipment.com (Tube Equipment Corporation)
http://www.HistoryOfRecording.com (History of Recording)




      From: Rob Spencer <rob at gmsn.co.uk>
 To: "synth-diy at dropmix.xs4all.nl" <synth-diy at dropmix.xs4all.nl> 
 Sent: Tuesday, December 15, 2015 7:46 AM
 Subject: [sdiy] Cleaning PCBs in Ultrasonic Baths
   
I’m pretty sure it is okay to do this, but just wanted to check with you guys first, but is it okay to clean flux from PCBs after the SMD chips have been soldered?
If so, what settings? About 65DegC? On the delicate setting for about 30 mins?
Many thanks in advance.
Rob Spencergmsn.co.uk07590 267835
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20151217/f2d6a9d6/attachment.htm>