[sdiy] Home silkscreen painting ?

Julien Delgoulet jdelgoulet at free.fr
Sun Aug 30 16:48:08 CEST 2015

You can contact Nazdar. Theyr french distributor sent me some samples so i can test the ink on my panels. 
Usually ink for panel is the one that cure quickly. (Do not answer the phone while screenprinting or you will have to clean your screen ...)
Just use a heater to cure the ink and keep it away from dust. Then wait for like 48 hours.

Also, some company can make screen from your pdf. I know Tiflex does that In France. Pretty expansive thought ...

PS: i tested co2 laser marking on black anodized aluminum ... It´s gorgeous .. May be an alternative to screen printing ... ( i can send you a photo of that panel if you want)


Le 30 août 2015 à 13:17, Paul Perry <pfperry at melbpc.org.au> a écrit :

> Not mentioned in the tutorial that I could see, but I think the ink
> mentioned is heat set (you can do this in a toaster oven.)
> All the lasting metal screen printing I have seen is either heat set or cured by UV lamps.
> As has been observed, solvents for cleanup are usually pretty nasty.
> paul perry Melbourne Australia
> ----- Original Message -----
> Hi,
> nice tutorial:
> http://www.guitarfool.com/Silkscreen.html
> best from austria
> dave
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20150830/3517517d/attachment.htm>

More information about the Synth-diy mailing list