[sdiy] Probes and Smoke

[Jean-Pierre Desrochers]

I have a Weller WSA350 smoke extractor at home that I do not use..
It is praticaly new.. very few uses.. like this one:
http://r.ebay.com/oRbe6k

They usualy sell between $60 and $90 depending on their state.
Like these type of smoke extractors you hear the fan noise a lot.
But it does what it's supposed to.
One of the best of it's category.
If you need one and are interested I could consider selling it..

Cheers !

J-Pierre

Le 2015-04-30 08:14, Neil Johnson a écrit :
> Hi Maarten,
> 
>> Can someone recommend some small medium/good quality probes.
> 
> I like the probes from www.probemaster.com.  Nicely made, and
> certainly good enough for HP and Tek scopes.
> 
>> And I am also looking for a solder fume extractor,
> 
> At work we have an Oki extractor:
> 
> http://www.conrad-electronic.co.uk/ce/en/product/588334/OKI-by-Metcal-Soldering-Fume-Extractor
> 
> but that may be a bit too big and expensive for you.  At home I use a
> Cliff extractor
> 
> http://www.cliffuk.co.uk/products/tools/cliffume.htm
> 
> smaller and lighter but not necessarily quiet.  If you really do need
> quiet then the only real option is to have the extractor pump away
> from the bench, with a fat extraction tube up to bench level,
> something like this:
> 
> http://www.conrad.com/ce/en/product/588185/Ersa-EA55-i-Soldering-Fume-Extractor
> 
> Cheers,
> Neil
> --
> http://www.njohnson.co.uk
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy