[sdiy] midi and DIN sync in the one connector

[foRUMS 4 punkdISCO]

Nice.. That was the one I was looking at..

I like the fact that it is velocity sensitive as I suspect the CR8000 will
give you different sounds with different voltages (despite it not being
velocity sensitive).

Let us know how you get on..

Ta,

Paul
London
www.punkdisco.co.uk

> -----Original Message-----
> From: Adam Inglis [mailto:21pointy at tpg.com.au]
> Sent: 29 April 2015 08:17
> To: *SYNTH DIY
> Subject: Re: [sdiy] midi and DIN sync in the one connector
> 
> Elby Designs sell a 16 channel version
> 
> http://www.elby-designs.com/contents/en-us/p959_MIDI2SDS-16.html
> 
> I think I may even be able to fit it in the case
> 
> Adam
> On 29/04/2015, at 5:04 PM, foRUMS 4 punkdISCO wrote:
> 
> > Hey Adam
> >
> > Ive thought about doing this to my CD8000.  Can I ask what Midi to
> > Trig kit you will be using?
> >
> > Thanks,
> >
> > Paul
> > London
> > www.punkdisco.co.uk
> >
> >> -----Original Message-----
> >> From: Adam Inglis [mailto:21pointy at tpg.com.au]
> >> Sent: 29 April 2015 05:53
> >> To: *SYNTH DIY
> >> Subject: [sdiy] midi and DIN sync in the one connector
> >>
> >> I'm retrofitting my old Roland CR-8000 drum machine with a midi-to-
> > trigger
> >> board.
> >> To minimise cosmetic disfiguration, I thought I might make the DIN
> >> sync
> > jack
> >> do double duty for midi.
> >> That way I could run a simple preset pattern and spice it up with
> >> some
> > extra
> >> notes/fills here and there.
> >> Does anyone know if there is likely to be any problems doing this,
> >> say, caused by stray capacitance or crosstalk? The ground wire would
> >> have to be shared.
> >>
> >> cheers
> >> Adam
> >> _______________________________________________
> >> Synth-diy mailing list
> >> Synth-diy at dropmix.xs4all.nl
> >> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> >
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at dropmix.xs4all.nl
> > http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> >
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy