[sdiy] midi and DIN sync in the one connector

[Adam Inglis]

Elby Designs sell a 16 channel version

http://www.elby-designs.com/contents/en-us/p959_MIDI2SDS-16.html

I think I may even be able to fit it in the case

Adam
On 29/04/2015, at 5:04 PM, foRUMS 4 punkdISCO wrote:

> Hey Adam
>
> Ive thought about doing this to my CD8000.  Can I ask what Midi to  
> Trig kit
> you will be using?
>
> Thanks,
>
> Paul
> London
> www.punkdisco.co.uk
>
>> -----Original Message-----
>> From: Adam Inglis [mailto:21pointy at tpg.com.au]
>> Sent: 29 April 2015 05:53
>> To: *SYNTH DIY
>> Subject: [sdiy] midi and DIN sync in the one connector
>>
>> I'm retrofitting my old Roland CR-8000 drum machine with a midi-to-
> trigger
>> board.
>> To minimise cosmetic disfiguration, I thought I might make the DIN  
>> sync
> jack
>> do double duty for midi.
>> That way I could run a simple preset pattern and spice it up with  
>> some
> extra
>> notes/fills here and there.
>> Does anyone know if there is likely to be any problems doing this,  
>> say,
>> caused by stray capacitance or crosstalk? The ground wire would  
>> have to be
>> shared.
>>
>> cheers
>> Adam
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>