[sdiy] midi and DIN sync in the one connector

[foRUMS 4 punkdISCO]

Hey Adam

Ive thought about doing this to my CD8000.  Can I ask what Midi to Trig kit
you will be using?

Thanks,

Paul
London
www.punkdisco.co.uk

> -----Original Message-----
> From: Adam Inglis [mailto:21pointy at tpg.com.au]
> Sent: 29 April 2015 05:53
> To: *SYNTH DIY
> Subject: [sdiy] midi and DIN sync in the one connector
> 
> I'm retrofitting my old Roland CR-8000 drum machine with a midi-to-
trigger
> board.
> To minimise cosmetic disfiguration, I thought I might make the DIN sync
jack
> do double duty for midi.
> That way I could run a simple preset pattern and spice it up with some
extra
> notes/fills here and there.
> Does anyone know if there is likely to be any problems doing this, say,
> caused by stray capacitance or crosstalk? The ground wire would have to be
> shared.
> 
> cheers
> Adam
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy