[sdiy] Rotary switch 6 positions 60deg throw..

[The Old Crow]

   I bought a pile of these at a recent Electronic Goldmine online sale.

http://www.goldmine-elec-products.com/prodinfo.asp?number=G19850A

   These are 1-pole 6-position non-shorting 60-deg angle per pole 
continuous switches.

   (These are for my CSR-15 project)

   FYI, Crow
/**/

On 3/26/2015 9:31 AM, Jean-Pierre Desrochers wrote:
> Does anybody have a link to a not too expensive
> Rotary switch 1 pole, 6 positions 60deg throw..
> Like this type:
> http://r.ebay.com/v0jVXJ
>
> I'm building a Hammond Scanner effect for my guitar
> using a real B3 scanner along with its vibrato line
> but housed in a small box that would not fit
> the original long 6 positions Chorus/vibrato switch.
> Instead I'll use relays activated by one
> small 6 pos. rotary switch.
> I found some but the cheaper was around $25.00US
>
> Any idea ?
>
> JP
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>