[sdiy] Audio quality switch chips??

[Tom Bugs]

By the way - shop around for best prices of DG chips.. there is a LARGE 
range..
For example: DG408 can be had for sub 40p from Future Electronics, 
whereas they're about double from Mouser


On 25/09/2014 04:34, The Old Crow wrote:
> I've used DG508/9 for a long time for both audio and DC switching.  
> They'll run fine at +/-12 or 15v with the control inputs still 
> responding to logic levels.  I've used DG2xx, 4xx as well.  Cost is 
> significantly higher, but they're worth it. --Crow
>
> /**/
>
> On 9/24/2014 4:29 PM, Dan Snazelle wrote:
>> I've tried the 4053 (from plus and minus 7.5 v supplies) and was 
>> quite unimpressed with the end result.
>>
>> Even with attenuation it had a noticeable impact on the sound quality
>>
>> So...I'm looking for advice from people on a high quality CMOS style 
>> chip ( logic levels don't matter) that can handle audio up to +/10v 
>> audio)
>>
>>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>

-- 
BugBrand LTD
UK company No. 07199808
VAT No. GB 988 2629 57
1 Ninetree Hill
BRISTOL BS1 3SB
United Kingdom
www.bugbrand.co.uk