[sdiy] Prophet 5 Rev 3

[John Henson]

Hi All,
I have two Rev3 P5's in for rebuilds at the moment and my problem is 
this. One of them definitely has problems with faulty RAM (6508's) and 
the other may have. The ideal solution would be to use 2716 EPROM's in 
two of the available sockets and to use a 6116 in the third socket to 
replace the 6508's (with some necessary rewiring of address and read 
write and enable lines). This would also allow the removal of two now 
unnecessary regulators from the power supply. That's all great but does 
anyone have the Binaries for the 8.1C firmware so that I could program 
either 2716 or 2732 EPROMs. I can't read 2708's with my hardware.
Regards,
John.